Account
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
Found 80 product(s). Showing product(s) 1 to 80.
The SMH is a range of Heavy Duty Joist Hangers designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel. ... read on
Stainless steel masonry-timber tie for domestic and small commercial buildings up to four storeys high. Suitable for buildings with a maximum height if 15m and cavity widths from... read on
A bolt down post shoe used for installing deck posts onto an existing concrete base. Size: 100x100mm ... read on
The SP is an economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers a... read on
The SMH is a range of Heavy Duty Joist Hangers designed for building into brickwork or blockwork. As standard all hangers are manufactured from 2.0mm thick pre-galvanised steel.... read on
An inexpensive perforated strip which can easily be cut or bent to provide a quick and reliable method of bracing roof trusses / diagonal strutting to floor joists / holding down... read on
A heavy duty general purpose angle plate manufactured from 2.0mm thick galvanised steel to BS EN 10346 +G275. Features: • Heavy Duty • Ideal for retro-fitting Fixings:... read on
A versatile range of brackets for use in 90 degree connections allowing for use of nails, screws and / or bolts and coach screws. AB Angle Brackets have a reinforced rib. Size O... read on
Long Leg Timber to Timber Hangers. Manufactured from 1.5mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixe... read on
Manufactured from 2.5mm thick galvanised steel, powder coated after fabrication for superior dual coated corrosion protection... read on
Timber to timber joist hanger to support 47mm wide joists from 100 to 150mm in depth. Manufactured from 2mm thick galvanised steel, powder coated after fabrication for superior d... read on
Application – Used where new walls are being built directly from existing masonry. Suitable for both internal and external brick or block walls, in buildin... read on
Frame cramp (supplied in stainless or galvanised steel) for restraining masonry to new or existing structures and for building in non-structural elements (frames etc). Technical... read on
For all applications to enhance bolt performance by reducing timber rotation and joint movement. Place between timbers on an M12 bolt prior to tightening.... read on
Support of short span joists, trap hatches and in-fill timbers in roof space. Designed for fast and economical light duty applications. Material – Produced from 0.8... read on
For use in heavy duty applications such as multiple truss units, main trimmer joists, purlin to beam connections or similar situations where unusually heavy loads occur. &... read on
An economical on-site method of butt jointing timbers of similar section. Suitable for use when replacing rotten floor joist ends, replacement of fire damaged timbers and repairi... read on
Manufactured from galvanised 40x3mm mild steel, powder coated after fabrication for superior dual coated corrosion protection. Size options: 45x45x40mm 90x45x40mm 90x... read on
WBFS is a thin profile engineered window board strap used to attach timber window boards to the internal face of a masonry wall and many other non structural general fixing... read on
The standard hanger is designed for building into brickwork or blockwork. Size options: 150x150mm 150x175mm 150x200mm 150x225mm 150x250mm ... read on
The perfect solution for improved bike storage. The PowaRack™ space saving Bike Stand offers a durable secure stand that can accommodate 3 to 5 bikes. NO ASSEMBLY REQUIR... read on
Universal fixing strap is a reinforced 1mm galvanised strap suitable for many DIY and other non structural general fixing applications. Product Code - UFS Width (mm) - 30 ... read on
Light duty restraint straps can be used for vertical restraint applications, such as holding down wall plates to masonry. These multi-holed straps are supplied in 100mm increment... read on
Mono truss shoe is designed for the support of a short span, mono or in-fill truss where the lower weight loadings are required over a standard girder truss shoe. Size options:&... read on
Attaches trusses and rafters to wall plates to provide wind restraint. Avoids skew nailing damage and provides positive resistance to wind forces. Size options: 38mm 4... read on
A multi-purpose fixing angle plate for general site applications, ie for connecting timber joists to timber purlins. Features: Various sizes available Fixings: • Typ... read on
For all applications to enhance bolt performance by reducing timber rotation and joint movement. Place between timbers on an M12 bolt prior to tightening. 50xM12 PER BOX OF 100... read on
SST Starter Tie supplied complete with nylon plug. Used where new walls are being built directly from existing brickwork. Alternatively can be used without plug and screwed direc... read on
Application – Type 2 – A general-purpose wall tie for applications such as small commercial buildings and domestic properties. They are suitable for buildings ... read on
A nail plate system for manual use which enables the construction of timber structures on site to strengthen joints for non-structural applications. Automated production ensures ... read on
H horizontal restraint straps are a traditional heavy duty restraint strap used to provide horizontal restraint applications such as tying timber roofs and floors into masonry wa... read on
Suitable for timber to timber, timber to masonry and timber to steel applications. Manufactured from heavy duty 3mm thick galvanised steel, these 40mm wide brackets and plates pr... read on
Heavy duty welded bracket (75 x 75mm with 220mm stem), designed to be set into concrete. To secure garden sleepers, posts for gazebos, carports and shelters. Not suitable for fen... read on
Used to fix arris rails between concrete posts. Designed to be slotted into a mortice hole in concrete fence posts and nailed or screwed to timber arris rail.... read on
The PowaPost repair spike is a sturdy welded shoe which provides an easy solution to broken or rotted timber posts that have been previously set into concrete. Perfect ... read on
The BRA is a galvanised light duty angle brackets suitable for many DIY, kitchen fitting and professional fixing applications. Produced from galvanised steel. Size options: ... read on
A galvanised landscaping wire gabion manufactured from 3mm diameter 50x50mm mesh, hot dipped galvanised for superior durability and corrosion protection. Available in four stand... read on
Suitable for fixing arris rails to timber posts during new fence construction. Fixed to the post using screws and/or coach screw/bolt. Options: Left hand Right hand L... read on
A galvanised 90 degree connector available in a range of sizes with two slots and multi-hole pattern designed for easy adjustment. Features: Light duty General DIY non-struc... read on
The CSP Corner stretcher plate for DIY and professional fixing applications. Manufactured from pre-galvanised mild steel. Size: 25x25x38mm PRICE PER BOX OF 10... read on
A galvanised fixing used to securely attach fence panels to posts reducing the risk of nail damage to timber. Size options: 32mm 38mm 44mm 50mm ... read on
This robust universal tool is designed to aid installation of Post Spikes, to protect the shoe whilst hammering into the ground. The PowaPost Driving Tool should always be u... read on
For use with feather edge fencing, this galvanised bracket secures arris rails to posts. The ARB 285 has a pointed end. Size Options: 100mm 225mm 300mm ... read on
The HJS a superior alternative to timber strutting, Herringbone Struts offer a cost effective method of providing necessary lateral support to floor joists as required by the Bui... read on
Long Leg Timber to Timber Hangers. Manufactured from 1.2mm thick pre-galvanised steel with 50mm wide legs, suitable for solid joist or I-Beam applications, either face fixe... read on
The PowaPost Bolt Down Shoe is designed for use when posts are required to be installed on an existing hard surface such as a concrete or wooden base. Ideal for use when bui... read on
Expanded metal brickwork reinforcement is embedded in mortar joints (usually every third course) to give extra tensile strength to wall and help withstand vibration and sudden lo... read on
A sturdy 3mm thick shoe designed to fix deck posts into new concrete. Size: 100x100mm ... read on
Standard Timber to Timber Hangers. A quick and safe method of joist trimming for light, medium and heavy applications such as supporting floor joists, trimming stair wells, and u... read on
The CPL Corner plate for DIY and professional fixing applications. Produced from galvanised steel. PER BOX OF 10 Size Option: 82x82mm.... read on
PER BOX OF 10 The MP Mending plates used for DIY and professional fixing applications. Size options: 50x50x10mm 75x75x15mm ... read on
The BRA is a galvanised light duty angle bracket suitable for many DIY, kitchen fitting and professional fixing applications. Produced from galvanised steel. Size Options: ... read on
The PowaPost Bolt Down Shoe is designed for use when posts are required to be installed on an existing hard surface such as a concrete or wooden base. Hot dip galvanise... read on
Application – Used for fixing timber door and window frames to brickwork by building into mortar courses as construction progresses. Suitable for bui... read on
A range of pre-punched flat connectors suitable for many timber to timber, masonry or steel applications. Manufactured from 2.5mm thick galvanised steel as standard. Size ... read on
The Flush Fit Bolt Down is particularly suitable for applications where a post requires fitting against a flush surface or mounted on top of an existing wall, or in line with the... read on
Engineered to simplify the building of decks and garden structures, our range of post bases, clips, brackets, hangers, and connectors provides not only aesthetically pleasing con... read on
The EasyGrip design holds the timber post in a tight wedge grip without the need for fixings. Size options: 50x50x600mm 75x75x750mm 100x100x750mm ... read on
Multipurpose fixing that can be used for connecting roof timbers, joist trimmings, studding and general timber frame construction. Slotted design allows bending on site to suit a... read on
A multi purpose connector designed to be bent on site to suit many timber to timber jointing applications. Manufactured from 1.5mm galvanised steel, powder coated after fabricati... read on
Manufactured from 2.0mm thick galvanised steel, powder coated after fabrication for superior dual coated corrosion protection.... read on
Suitable for most ground conditions, this post spike gives the ideal anchor for any common timber post. Drive the spike into the ground using the Powapost™ driving in tool,... read on
A Sturdy galvanised steel pin, designed to be driven into soil to secure log border roll. Simply insert the pin into the soil and nail or screw through the pre-punched holes into... read on
A strong slotted bracket, manufactured from 3mm thick galvanised steel. Powder coated for superior dual coated corrosion protection.... read on
Galvanised bracket (70 x 70 x 180mm long) used to extend timber posts. Use 2 brackets to extend 70 x 70mm to 150 x 150mm timber. Use 4 brackets for anything larger. PER BOX OF 5... read on
A galvanised bracket enabling secure fixing of gravel boards to fence posts. PER BOX OF 50 Size options: 50x150mm 50x225mm ... read on
Mending plates for DIY and professional fixing applications. Manufactured from pre-galvanised mild steel. Size options 75x15mm 100x15mm ... read on
A light duty 0.9mm thick perforated angle with reinforced holes. Different Size: 50x50x50mm (per 250) 75x75x75mm (per 250) 100x100x100mm (per 100) ... read on
A pyramid shape decorative and functional cap that protects fence or deck posts from weather damage. Available in brown and silver. Size and colour options - Brown: 75x... read on
A round shape decorative and functional cap that protects fence or deck posts from weather damage. Available in brown and silver. Brown: 75x75mm 100x100mm Silver ... read on
The PowaPost Post Extender is a single piece welded box section 180mm long that enables easy extension of any 75 or 100mm timber post, allowing easy addition of decorative p... read on
Galvanised steel ground staples used to secure weed/ground control fabric to the ground. PER BOX OF 10 Size options: 25x120mm 100x150mm ... read on
Designed for use when soil conditions are unsuitable for drive-in spikes. Size: 75mm or 100mm.... read on
BPC Timber to Masonry Joist Hanger inch S inch - 47mm with different size - Code BPC/SMH/S/47 The standard hanger is designed for building into brickwork or blockwork. Size options 47x... read on
A steel retaining bracket with decorative scroll design, used with traditional hipped roofs to prevent ridge tile movement. Screw or nail fix to rafter and embed in mortar. Size... read on
The standard hanger is designed for building into brickwork or blockwork.# Size options: 100x100mm 100x125mm 100x150mm 100x175mm 100x200mm 100x225mm 100x250mm ... read on
Secured to timber studding by use of pre-punched spikes, to protect plumbing and electrical wiring against random nailing. Unique integral metal teeth press into timber. No nails... read on
For use with Timber Connectors above to reinforce timber on either side when tightening with bolts. PER BOX OF 100 Size: 50x50mm... read on
A pre-galvanised bracket designed to attach window boards to masonry wall. Material – Manufactured from 13 x 3mm galvanised steel to BS EN 10346 + G275. PER BOX OF... read on
