Account
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
Found 70 product(s). Showing product(s) 1 to 70.
These products act to secure two leaves of a cavity wall to each other, allowing them to act as one structurally. A cavity tie usually incorporates some mechanism, (usually a cha... read on
Channel to timber connector - maximum drop 120mm. Material: Galvanised Mild steel to BS EN 10142:2000 Packed: 100 per box Weight per 100: 3.10kg ... read on
A 4.5mm Newbuild wall tie for securing external masonry to timber frames. The first helical wall tie was tested to EN846 for timber frame construction. Used for domestic and smal... read on
Resin to Resin Remedial Wall Ties (HELI-4.5-ONE, HELI-6-ONE) Used when the existing ties have either corroded or insufficient ties have been used. Tying both the inner (load bea... read on
SST Starter Tie supplied complete with nylon plug. Used where new walls are being built directly from existing brickwork. Alternatively can be used without plug and screwed direc... read on
Supplied complete with 50mm x 3.35mm Stainless Steel Annular Ring Nails. Application - This type of timber frame wall tie is right for domestic and small commerci... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The ties, once i... read on
The VST1 tie range has a Multidrip feature to prevent moisture from traveling across the cavity. Its categorisation as a Type 1 wall tie means the VST1 tie is suitable for most b... read on
These products both allow vertical movement whilst offering horizontal restraint. The channel system tends to be face-fixed while the slot is usually cast into concrete. These sy... read on
Soffit fixed both sides where fixings can be made directly above. Heavy Duty. Hole size standard 12mm to suit M10 expansion bolts or M10 head bolt. Design load resistant dependan... read on
Used to stabilise solid or rubble walls, repair delaminated brickwork and to reconnect separated internal party walls to the external leafs. Installation: 1. Drill hole to requ... read on
The timber panel closer helps minimise air leakage at the joint between closed panels and also prevents damage to the exterior substrate when using a screw alone. Material ... read on
Provide added strength and stability. Galvanised or stainless steel finish. Assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar&nb... read on
These products allow new walls to be joined to existing structures. They can be used to extend an existing structure, or they can be used to help create an additional leaf where ... read on
Superior alternative to unreliable, slow and costly timber struts. Meets bracing requirements for long span domestic floors. Material Pre-galvanised mild steel. Featu... read on
A range of heavy duty (welded) and light duty (bent and/or twisted) stems. Available in standard stem lengths, head sizes and hole configurations with other options available on ... read on
This range of ties allow masonry walls to be tied back to other structures (steelwork or masonry) providing restraint in one direction but allowing movement in the other. This is... read on
A heavy-duty wall tie suitable for most buildings in the UK of any height, with cavities up to 150mm. Used for collar jointed walls, in full fill cavities or where the prevention... read on
Screw in wall starter with nylon wall plug, WST provides lateral stability to brickwork or blockwork walls. Can be installed horizontally or at a 30° angle to the mortar join... read on
Galvanised Mild Steel Thickness 0.5mm Packed 100 per box Weight per 200: 12Kg ... read on
An accepted method of tying masonry to a framed structure is the use of steel channels and ties. This allows the channel to be fixed to the framed structure during or shortly aft... read on
Designed to provide ties for trusses and rafters likely to be subject to high winds, this versatile range may be used for general purposes, strongback attachements and as all-pur... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The ties, once i... read on
SST Starter Tie supplied complete with nylon plug. Used where there is a cavity and a new wall needs to be built. Supplied with drip. SST-225-STST Compressive... read on
The PWT200 is the first connector specifically designed and engineered to connect the party walls of timber framed buildings. It’s manufactured using minimum material secti... read on
A range of heavy duty (welded) and light duty (bent and/or twisted) stems. Available in standard stem lengths, head sizes and hole configurations with other options available on ... read on
SSFT Starter Frame Tie. Used for fixing timber door and window frames to brickwork by building into mortar courses as construction progresses Compressive Load Capacity: ... read on
The SWT wall ties are used to restrain external brickwork back to timber frame building structures. The BSWT offers an outstanding combination of performance and cost in a wall t... read on
These products both allow vertical movement whilst offering horizontal restraint. The channel system tends to be face-fixed while the slot is usually cast into concrete. These sy... read on
This range of ties allows masonry walls to be tied back to other structures, (steelwork or masonry) providing restraint in one direction but allowing movement in the other. This ... read on
These products allow the introduction of a cavity tie into a sitation where no ties are present. These stainless steel ‘wavy’ tail ties are used for remedial applicat... read on
The HRC is a one-piece connector for supporting hip members from the ridge beam or rafters. It is site adjustable for slopes up to 45°, to cater for the hip pitch for bo... read on
This range of ties allows masonry walls to be tied back to other structures, (steelwork or masonry) providing restraint in one direction but allowing movement in the other. This ... read on
The WSTC is a screw-in cavity wall tie suitable for connecting a new leaf of masonry to an existing structure. Supplied with nylon wall plug and neoprene ‘O’ ring ... read on
These products allow masonry walls to be restrained back to other elements of the structure. The ties, once in position, prevent sideways movement between a wall and another stru... read on
These products allow vertical movement whilst offering horizontal restraint. The channel system tends to be face-fixed while the slot is usually cast into concrete. These systems... read on
For Connecting 38mm Channel Material Galvanised Mild Steel to BS EN 10142:2000 Packed 250 per box Weight per 100 4.60kg ... read on
Soffit Fixed both sides where fixings can be made directly above. Heavy duty. Hole size standard 12mm to suit M10 expansion bolts or M10 head bolt. Design load resistant dependan... read on
The SPA is a versatile bracket used to attach timber sole plates to concrete foundations. Material Pre-galvanised mild steel For sizing and technical information please se... read on
Drip feature to prevent moisture travelling across the cavity (taking less space than vertical twist). Drip position 90mm from safety end as standard. 250mm long stainless steel ... read on
Used as a soffit fixed head restraint. Light Duty, twisted head allows for fixing a right angle for cavity. Hole size standard 12mm to suit M10 expansion bolts or M10 head bolt. ... read on
Single sided and double sided connector plates for enhanced bolt performance in timber. Conforms to BS EN 912: 1999 Annex C. Specification for toothed plate connectors. Material... read on
The BTS and SWT wall ties are used to restrain external brickwork back to timber frame building structures. The BTS and SWT offer an outstanding combination of performance a... read on
Types 2, 3 and 4 Stainless Steel Masonry to Masonry Wall Ties.WTS2: Type 2 Wall Ties: Masonry General Purpose Type 2 wall ties are suitable for general purpose applications such ... read on
The RBL Bib Lath provides plaster/render backing and is also suitable for the refurbishing of damaged or deteriorated faces of masonry walls. Available in galvanised for internal... read on
When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges. Note: Frame tie should be fully ... read on
The Vista TPT is designed to safely tie across large cavities in traditional brick/blocks. As a result of problems experienced over wider cavities (150- 375mm) and their weight c... read on
Vista have developed Vista Weld 3 to meet the ever increasing requirements of specifiers. Vista Weld 3 is a welded ladder type Bed Joint Reinforcement with 3mm outer wires. It is... read on
The RR ridge rafter connector provides alignment control and correct nailing locations. The RR may be used with any rafter slope up to 30°. For back-to-back installations, th... read on
The VHR head restraint is designed to restrain the top of the inner leaf of cavity walls. The standard restraint consists of 2 angles and can be used to restrain both 100mm and 1... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The ties, once i... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The ties, once i... read on
The Vista Stainless Steel Wall Starter System joins new walls to existing masonry. Suitable for both internal and external brick or block walls, the connectors can be slotted tog... read on
Ideal for use as a general reinforcement mesh. DML Expanded Metal Lathing is widely used as a backing to help prevent cracks occurring where different materials meet. Availa... read on
These products act to secure two leaves of a cavity wall to each other, allowing them to act as one structurally. They incorporates a multidrip feature to discourage moisture mov... read on
The HMBTS type 7 timber frame wall tie is designed to connect the masonry outer leaf to a structural timber frame. Available is a range of sizes to suit cavities from 50mm to ... read on
Attaches window boards to masonry wall. Material: Pre-galvanised mild steel. Item code WBT06 (150mm length). For sizing and technical information please see the document downlo... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The cramps, once... read on
Galvanised mild steel Thickness 0.5mm Packed 500 per box Weight per 100: 2.25Kg ... read on
Connecting Spring Tee Material Galvanised Mild Steel to BS EN 10142:2000 Packed 500 per Box Weight per 100 3.43kg ... read on
Connecting Spring Tee to Channel Material Galvanised Mild steel to BS EN 10142:2000 Packed 200 per Box Weight per 100 4.32kg ... read on
The basalt fibre composite Neutras wall tie is an extremely versatile product and has been designed to serve as a uniquely adaptable substitute for traditional steel ties. Neutra... read on
These products allow masonry walls to be restrained back to other elements of the structure. This could be pre-existing walls, or new or pre-existing steel work. The ties, once i... read on
Vertical Twist feature to prevent moisture travelling across the cavity. The design means that the tie can be installed either way up. It’s categorisation as a Type 1 wall ... read on
The basalt fibre composite Neutras wall tie is an extremely versatile product and has been designed to serve as a uniquely adaptable substitute for traditional steel ties. Neutra... read on
This connector was developed to be used with timber curtain wall on concrete floor. It can be used in several configuration depending on the installation. Its special sh... read on
The SML (Security Mesh Light) and SMH (Security Mesh Heavy) are a low profile flattened mesh ideal for sandwiching between plasterboard and structural studs or joints to impr... read on
This range of ties allow masonry walls to be tied Back to steelwork providing restraint in one direction but allowing movement in the other. This is achieved by placing a debondi... read on
