Blue-Tip screwbolts are one-piece heavy duty concrete screws with ETA option 1 approval
Approved for very small edge distances
One piece design for easy installation
... read on
An all steel, tension-free, one piece, threaded fastener
Use to fasten various fixtures directly to drywall, wood, concrete, sand-lime stone or brickwork
No plug needed
... read on
Steel wedge nail with ETA part 6 approval for redundant systems
F120 fire resistance approved
Hammer set anchor for push through installation
Product idDescriptionD... read on
Dewalt 25mm Fine Drywall to Light Steel collated screws:Will fit Makita and Fein autofeed screws guns (See specific guns for size capacities)Size: 25mm x 3.5mm1000... read on
The AC 100-PRO is approved for a temperature range of 120°C and can even be used in water filled holes. It also provides a fast curing time and high load capacity making it... read on
Extra hard nails have been flame hardened and are virtually unbreakable. The special zinc plating enable them to be driven into very hard steel and concrete, with a ‘step... read on
An all steel, tension-free, one piece, threaded fastener
Use to fasten various fixtures directly to drywall, wood, concretem sand-lime stone or brickwork
No plug needed
... read on
Blue-Tip screwbolts are one-piece heavy duty concrete screws
Approved for very small edge distances
One piece design for easy installation
Produ... read on
Mesh sleeves for using adhesive anchors in hollow base materials
Product idDescriptionLength mmRing Diameter mmDiameter mmThreadPack Qty
DFC4730000
Adhes... read on
Dewalt 45mm Fine Drywall to Light Steel collated screws:Will fit Makita and Fein autofeed screws guns (See specific guns for size capacities)Size: 45mm x 3.5mm&nbs... read on
Nylon universal fixing
Expansion in solid building materials, reliable knot formation in all hollow building materials
Suitable for wood and chipboard screws
... read on
Special zinc plated nails for very hard concrete. High performance design for optimal penetration.
Applications
Drywall steel track installation on to concrete, block or stee... read on
Special zinc plated nails for very hard concrete. High performance design for optimal penetration.
Applications
Drywall steel track installation on to concrete, block or stee... read on
Dewalt 55mm Fine Drywall to Light Steel collated screws:Will fit Makita and Fein autofeed screws guns (See specific guns for size capacities)Size: 55mm x 3.5mm1000... read on
Express nail for lighter applications in concrete and masonry
The nail sleeve is hammered in and expands its entire length in the hole
The collar holds the item to be attache... read on
Steel wedge nail with ETA part 6 approval for redundant systems
F120 fire resistance approved
Hammer set anchor for push through installation
Product idDescriptionDi... read on
Patented one-piece vibration resistant anchor in 82 grade steel with eyePre-expanded anchor design allows for easy installation
Applications include suspended ceilings and wire ... read on
The Dewalt Blue-Tip Concrete Screwbolts.Blue-Tip screwbolts are one-piece heavy duty concrete screws. Approved for very small edge distances. Dust relief thread allows for low in... read on
Patented, one-piece, tamper-proof vibration resistant anchor in 8.2 grade steel with mushroom head
Pre-expanded anchor design allows for easy installation
Applications includ... read on
Cracked concrete throughbolt
The PTB-PRO is fully threaded, torque controlled, wedge expansion anchor designed for consistent performance in cracked and uncracked concret... read on
Chisel point rods available with zinc plated A4 stainless steel finish
Suitable for SC-PRO spinning capsules
Product idDescriptionLength mmDiameter mmThread mmPack Q... read on
Plastic and mesh sleeves for using adhesvie anchors in hollow base materials
Product idDescriptionLengthDiameterRing DiameterThreadPack Qty
DFC4710000
Adhesi... read on
Standard nails ideal for concrete
Collated in strips of 15 for rapid, repeat firing
Mechanical zinc plated for indoor or outdoor use
Overview
Standard nails ideal for concr... read on
Window screw with flat head for metal and plastic frames
Zinc plated with either a T25 or T30 torx recess and self-tapping thread
Stress-free fastening without additional plu... read on
Basic nylon hammer screw
Easy to install through part to be fixed
Expands by hammering or screwing (can be removed)
Applications include thermal insulation supports, conduit... read on
Dewalt 55mm Coarse Drywall to Wood collated screws:Will fit Makita and Fein autofeed screws guns (See specific guns for size capacities)Size: 55mm x 3.5m... read on
BLUE-TIP 2 SCREW-BOLTS are one-piece, heavy duty concrete screws with ETA Option 1 approval. The patented thread taps into the hole during installation to provide keyed engagemen... read on
Nylon brush for quick cleaning of drilled holes
Not recommended for ETA approved applications
Product idDescriptionDiameter mmPack
DFC1660000
Nylon Br... read on
Dewalt 45mm Coarse Drywall to Wood collated screws:Will fit Makita and Fein autofeed screws guns (See specific guns for size capacities)Size: 45mm x 3.5m... read on
All purpose wall anchor
The anchor moulds and conforms exactly to the surface of the hole
360° fastening providing a greater holding power by distributing the force over ... read on
Fast and easy to use expansion anchor designed for use in wallboard
The anchor has a pierce point, requiring no pre-drilling
Includes screws... read on
Easy to install toggle fixing
Patented hollow wall anchor for higher wall
Reusable in the same hole (remove the bolt without losing the anchor)
For Light Duty applications i... read on
Through fixing
Light sleeve anchor for push-through installation
Steel quality of 4.8 grade
ProductidDescriptionDiameter mmLength mmRing DiameterThreadMax Tfix... read on
Uncracked concrete throughbolt uncracked concrete throughbolt
ETA option 7 approval
Long thread for flexibility in fixture thicknesses
ProductidDescriptionThre... read on
Special zinc plated nails for very hard concrete
Applications:
Drywall steel track installation on to concrete, block or steel
Plywood to concrete or block
Furring strips to ... read on
Formulation specifically designed for use in extreme cold down to -20 °CStays easy to pump even at low temparaturesSuitable for water filled drill holes and overhead applicat... read on
Self drilling hollow gypsum wallboard anchorUnique patented design
For light duty applications including brackets, mirrors, signage and light bathroom fittings.
Includes sc... read on
Ballistic nails suitable for medium duty applicationsZinc PlatedAlso suitable for other brands of tools including Spit P370 Hilti DX460Length 25 mmRing Diameter 76 mm... read on
Window screw with cylindrical head for wooden frames
Zinc plated with either a T25 or T30 torx recess and self-tapping thread
Stress-free fastening without additional plugs
... read on
For fixing window frames and door frames made of wood, plastic or aluminium
By turning the metric screw the cone is drawn into the sleeve and the fixing is expanded
Suitable ... read on
Plastic anchors for fixing external thermal insulation composite systems with rendering
Nail stopper prevents expansion before nylon part is fully embedded
Polyamide material... read on
Basic nylon hammer screwEasy to install through part to be fixedExpands by hammering or screwing (can be removed)
Applications include thermal insulation supports, conduit cli... read on
Plastic anchors for fixing external thermal insulation composite systems with rendering
Nail stopper prevents expansion before nylon part is fully embedded
Polyamide material... read on
Express nail with eye for lighter applications in concrete and masonry.
The nail sleeve is hammered in and expands its entire length in the hole.
Applications include lightweig... read on
For use in soft, existing and non-homogeneous base materials
Only suitable for static loading
Bolt or threaded rod is removable
ProductidDescriptionDiamete... read on
For use in soft, existing and non-homogeneous base materials
Only suitable for static loading
Bolt or threaded rod is removable
ProductidDescriptionDiameter mmThread... read on
For use in soft, existing and non-homogeneous base materials
Only suitable for static loading
Bolt or threaded rod is removable
ProductidDescriptionDiamet... read on
Zinc plated internally threaded expansion anchor
Easy to install anchor with ETA option 7 approval for uncracked concrete and part 6 approval for cracked concrete
F120 fire r... read on
Plastic sleeve for using adhesive anchor in hollow base materials
Product idDescriptionLength mmDiameter mmRing Diameter mmThread mmPack Qty
DFC4720000
Adhes... read on
Dewalt DNM34SP35G12Z Galvanised Spiral Nails Twist Shank - Box x 1000
Perfect Fit for the DCN694 PPN Nailer!
The Dewalt universal galvanised twist shank metal connecting nails ... read on
BLUE-TIP 2 SCREW-BOLTS are one-piece, heavy duty concrete screws with ETA Option 1 approval. The patented thread taps into the hole during installation to provide keyed engagemen... read on