Fischer Construction Adhesive Crystal MS 290 ml (DE/EN) Quantity 12 - Code 503317

• 100% transparent ingredients without colour cast.
• Compatible with natural stone. No discolouration in the contact zone.
• Remains permanently elastic and compensates for unevenness in the substrate.
• For interior and exterior use.
• Harmless ingredients according to GEV-EMICODE test seal EC1PLUS - very low emission and French A+ (VOC classification).
• Colour crystal clear.

Advantages

• The transparent material enables almost invisible bonding and sealing.
• Due to the high-quality ingredients, Crystal MS avoids discolourations even on sensitive building materials such as natural stone.
• The high initial adhesive strength of ca. 180 kg/m² on all common building materials enables easy handling without additional pre-fixation.
• The high elasticity ensures tension-compensating adhesive joints as well as elastic joint seals and thus compensates for unevenness in the substrate.
• The CE marking according to DIN EN 15651 confirms the application for façade and sanitary joints indoors and outdoors for permanent use.
• The virtually odourless adhesive prevents odour formation in occupied areas for a pleasant indoor climate.

The fischer Crystal MS with its transparent raw materials is perfectly suitable for permanent elastic sealing and bonding in visible areas, especially of transparent materials such as glass. Insulation materials, mouldings, panels and cladding can be securely sealed and bonded. Due to its high initial adhesion, pre-fixation is not necessary in most cases. Due to its tension-compensating property, it can be used outdoors even on natural stone and damp substrates.

• Bonding in the bathroom
• Glass and other transparent materials
• Bonding and jointing of tiles and slabs, also from natural stone
• Exterior bonding and sealing
• Connection joints

• Natural stone
• Steel, Metals
• Glass, glazed surfaces
• Wood and wood-based material
• Plaster
• Hard PVC
• Enamel, tiles, ceramics
• Masonry, clinker
• Concrete
• Brick

• Chemical basis: 1K Hybrid MS-Polymer
• Application temperature: +5 °C to +40 °C
• Curing time: approx. 4.5 mm/24h
• High elasticity of 12,5%
• Temperature resistance: -40 °C to +110 °C
• Solvent-, isocyanate- and silicone-free
• Waterproof and seawater resistant

Technical Data