Fischer Construction Adhesive Multi MS white 290 ml (DE/EN) Quantity 12 - Code 059389

• Very high elasticity (CE marking class 25HM) combined with good initial adhesion.
• For elastic joining and bonding indoors and outdoors, even on damp substrates.
• Can be painted over with water-based paints and synthetic varnishes.
• Colour black.
• Harmless ingredients according to GEV-EMICODE test seal EC1PLUS - very low emission; ISEGA; M1; DIN EN ISO 846 and French A+ (VOC classification).

Advantages

• The high elasticity of 25% enables tension-compensating adhesive joints as well as elastic joint seals and thus compensates for unevenness in the substrate.
• The CE marking according to DIN EN 15651 confirms the application for façade, sanitary and floor joints in interior and exterior areas for universal use.
• The virtually odourless adhesive prevents odour formation in occupied areas for a pleasant indoor climate.
• The external test reports, such as EC 1 PLUS, M1 and ISEGA, as well as the classification according to French VOC class A+, confirm the health benefits of the product. VOC class A+ confirms the health-protective application.
• The special formulation allows simultaneous fixing and sealing of mirrors, thus time-saving.

The fischer construction adhesive Multi MS is suitable for permanent elastic sealing of connection and expansion joints in interior and exterior areas. Its mould resistance allows it to be used in wet areas. Tested according to DIN EN ISO 846 for use as a ventilation duct sealant. Due to its tension-compensating property, it is also perfectly suited for sealing floor joints. Its applicability as an elastic adhesive with good initial adhesion on a variety of substrates makes it a universal sealing adhesive. Based on hybrid technology, Multi MS is also ideal for damp substrates outdoors.

• Connection and floor joints (interior & exterior)
• Movement and connection joints in kitchen, sanitary and installation areas
• Stress-compensating bonding of different materials
• Standard mirrors
• Bonding and jointing of moldings and tiles

• Concrete
• Steel, metals
• Wood and wood-based materials
• Hard PVC
• Masonry, clinker
• Glass, glazed surfaces
• Enamel, tiles, ceramics
• Brick
• Mirror
• Plasterboard and gypsum fibreboard

• Chemical basis: 1K Hybrid MS Polymer
• Working temperature: +5 °C to +40 °C
• Curing time approx. 3 mm/24h
• High elasticity of 25%
• Shore A 52
• Temperature resistance: -40 °C to +90 °C
• Solvent-, isocyanate- and silicone-free
• Waterproof and seawater resistant

Technical Data