Fischer Injection Mortar FIS P Plus 300 T HWK Quantity 12 - Code 523226

• Economic injection mortar with ETA for masonry and non-cracked concrete.
• Can be used with anchor rods FIS A, internal threaded anchor FIS E and fischer anchor sleeves.

Advantages

• With FIS P Plus, anchorings in masonry and non-cracked concrete for which approval is relevant can be realised in a particularly economical manner.
• FIS P Plus 300 T can be used with stable, standard silicone injection dispensers. No special equipment is required. As a result, procurement costs can be reduced on the basis of polyester resin.

The fischer injection mortar FIS P Plus is a polyester hybrid mortar with approval specifically for fixings in masonry and non-cracked concrete with a variety of masonry blocks. It is suitable for fixing fire escapes, handrails or canopies. The FIS P Plus is processed with the approved system components fischer threaded rod FIS A, fischer internal threaded rod FIS E together with the fischer injection anchor sleeves indoors and outside. It is possible to reuse cartridges already opened by simply changing static mixer. This saves time and money during installation.

• Awnings
• Canopies
• Fireplaces
• French balconies
• Fire escapes
• Gratings
• Gates
• Handrails

Approved for anchorings in:

• Concrete C20/25 to C50/60, non-cracked
• Vertically perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• Perforated blocks made from lightweight concrete
• Solid brick
• Aerated concrete

Also suitable for:

• Solid brick made from lightweight concrete

• FIS P Plus is a 2-component injection mortar based on polyester resin.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is extruded bubble free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
• Partially used cartridges can be reused by changing the static mixer.

Technical Data