Fischer Injection Mortar FIS VL 300 T, Quantity 12 - Code 539461

• High flexibility due to co-ordinated system components.
• Approved for concrete and masonry.
• Expansion-free fixing for small spacings and edge distances.

Advantages

• The FIS VL is approved for use in cracked concrete and masonry, and achieves a high load-bearing capacity in these conditions.
• The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.

The fischer injection mortar FIS VL is a vinyl ester hybrid mortar with approval for fixing standard applications in cracked concrete and masonry. The FIS VL is processed with the approved system components fischer threaded rod FIS A and fischer internal-threaded anchor RG M I indoors and outside. The temperature resistance of the FIS VL injection mortar of -40 °C to +120 °C allows for a solid load level even when subjected to high temperature demands, thus providing great flexibility.

• Steelwork constructions
• Timber constructions
• Guard rails
• Façades
• Staircases
• Steel brackets
• Machines
• Masts
• Awnings
• Canopies
• Gates
• Consoles
• Pipelines
• Gratings
• Satellite antennas

Approved for anchorings in:

• Concrete C20/25 to C50/60, cracked
• Hollow blocks made from lightweight concrete
• Vertically perforated brick
• Perforated sand-lime brick
• Solid sand-lime brick
• Solid brick
• Rebar connections
• Aerated concrete

Also suitable for:

• Concrete C12/15
• Hollow blocks made from concrete

• The FIS VL is a 2-component injection mortar based on vinyl ester.
• Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer.
• The mortar is extruded bubble free from the drill hole base.
• The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole.
• The injection mortar FIS VL 300 T can be applied without a special tool using a standard dispenser.
• Partially used cartridges can be reused by changing the static mixer.