Marldon MXS140 Rapid DPM 4L - 6KG - Code 250036

Marldon Rapid DPM MXS140 is a solvent free, accelerated two part epoxy based surface damp proof membrane, especially developed for suppressing residual moisture in concrete and sand and cement based subfloors. MXS140 is compatible UFH systems and produces a guaranteed surface damp proof membrane, accommodating up to 97% RH with just a single coat. We do not recommend the use of this product over anhydrite/calcium sulphate based screeds when UFH systems are installed within the screed. Due to its rapid drying properties, floor coverings or compatible Marldon smoothing compounds can be installed in as little as 3 hours after application.

Technical Specification: 

• Coverage Approx 12.5m² per 4ltr unit (dependent on the porosity of the substrate and method of application) to give a dry film thickness of approximately 250 - 350 microns per coat.
• Drying Time 3 to 4 hours at +20°C
• Composition MXS140 is an exibilised epoxy, which contains wetting agents and penetrants to maximise adhesion, flow control agents to minimise pinholes and overlapping platelets which provide an extra barrier to moisture vapour.
• Working Time Due to the fast cure profile designed into this product, all product should be applied onto the floor in a ribbon immediately after mixing. This will allow for the maximum working life to be achieved and facilitate application and improve coverage.
• Storage Temperatures during transport and storage of the goods must not fall below +5 or exceed +30°C. Protect from frost at all times. Keep out of direct sunlight and out of the reach of children.
• Shelf Life 6 months from date of production when stored in the original unopened container inline with recommended storage temperatures and conditions.
• Packaging Supplied in two parts, Part A Resin packed in an oversized metal tin, (which should be used for mixing both parts together). Part B supplied in a smaller metal tin, should be poured in to Part A prior to mixing.
• Colour / Mix Ratio Part A - Resin: Dark Grey. Part B - Hardener: Brown. Mix full kits only.
• Service Temperature Range -20°C to +80°C.