Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=44.0 mmC=19.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=48 mmC=22 mmB=9.5 mmB2=12.7 mm... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
A quarter ellipse cutter for architraves and hand rails.Can be used to form the top portion of handrail moulding when used in conjunction with Ref. 93/3.SpecificationsD=69.2 mmC=16... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.Ref. 7/01 has an extra long shank of 40mm.SpecificationsD=3/8 inchD=9.5 mmD2=4.5 mmC=9 mmR=2.5 mmOL=49 mmSha... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=19 mmC=11 mmR=4 mmOL=38 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg): 21Gros... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=18 mmD2=12 mmC=10 mmR=3 mmOL=38.6 mmShank Diameter=1/4 inchGeneral InformationNett Weight (k... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=50.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (k... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=55 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg)... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=28 mmC=15 mmR=8 mmOL=68 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 88Gros... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=31 mmC=16 mmR=10 mmOL=54.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 77G... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=31 mmD2=11 mmC=16 mmR=10 mmOL=44.6 mmShank Diameter=1/4 inchGeneral InformationNett Weight (... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=38 mmC=18 mmR=12.7 mmOL=56.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 6... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=35 mmC=17 mmR=12 mmOL=55.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 81G... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=41 mmC=20 mmR=15 mmOL=58.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 112... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=60 mmC=27 mmR=20 mmOL=65.1 mmBottom flat=11.1 mmShank Diameter=1/2 inchFor stationary machin... read on
Two rounded corners can be cut simultaneously.By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded.Central guide bearing can be remo... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=15 mmC=3/8 inchC=9.5 mmP=9 mmR=1/8 inchR=3.2 mmOL=41.5 mmShank Diameter... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=19 mmC=11.8 mmR=3/16 inchR=4.8 mmP=9 mmOL=48.9 mmShank Diameter=1/4 inc... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=22 mmC=12.6 mmR=1/4 inchR=6.3 mmP=9 mmOL=49.7 mmShank Diameter=1/4 inch... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=26 mmC=14.3 mmR=5/16 inchR=8 mmP=9 mmOL=51.4 mmShank Diameter=1/4 inchG... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=29.0 mmC=15.8 mmP=9 mmR=3/8 inchR=9.5 mmOL=52.9 mmShank Diameter=1/4 in... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=34.4 mmC=19 mmP=9 mmR=1/2 inchR=12.7 mmOL=56.1 mmShank Diameter=1/4 inc... read on
A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes.SpecificationsD=36 mmD2=16 mmC=33 mmR=20 mmOL=71.1 mmShank Diameter=1/2... read on
