These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=1/8 inchD=3.2 mmC=3/8 inchC=9.5 mmR=1.6 mmOL=61.5 ... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=1/8 inchD=3.2 mmC=3/8 inchC=9.5 mmR=1.6 mmOL=59 mm... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD1=5 mmC=13 mmOL=66 mmR1=2.5 mmShank Diameter=1/2Gen... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=3/16 inchD=4.8 mmC=1/2 inchC=12.7 mmR=2.4 mmOL=66 ... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=6 mmC=15 mmR=3 mmShank Diameter=1/4 inchOL=59 mmGe... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=1/4 inchD=6.3 mmC=1/2 inchC=12.7 mmOL=65 mmR=3.2 m... read on
These are ideal for engraving and decorative panel work.Made with Solid Tungsten Carbide inserts, with two flutes.SpecificationsD=1/4 inchD=6.3 mmC=1/2 inchC=12.7 mmR=3.2 mmOL=64.5... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=25/64 inchD... read on
Tungsten Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life.Highly Ground Tip Face polished to 800-grit ensures accurate cutting, with a fine finish.PTFE non-Stick... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=3/8 inchD=9... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD1=1/2 inches... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1/2 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1/2 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1/2 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=5/8 inchD=1... read on
Tungsetn Carbide Tipped 2.0mm micro-granular tips for extra-long cutter life.Highly Ground Tip Face polished to 800-grit ensures accurate cutting, with a fine finish.PTFE non-Stick... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=3/4 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=3/4 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=3/4 inchD=1... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=7/8 inchD=2... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1 inchD=25.... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1 inchD=25.... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD=1 inchD=25.... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template.SpecificationsD1=50.8 mmC=1 inches... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template.SpecificationsD1=63.5 mmC=1 inches... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with.The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A c... read on
Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.SpecificationsC=1/2 inchC=12.7 mmD=31 mmB=12.7 mmR=4.8 mmOL=65 mmShank Diameter=1... read on
Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.SpecificationsC=5/8 inchC=15.9 mmD=38.6 mmB=12.7 mmR=7.9 mmOL=68 mmShank Diameter... read on
Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius.SpecificationsC=5/8 inchC=15.9 mmD=34.5 mmB=12.7 mmR=7.9 mmOL=67.5 mmShank Diamet... read on
These cove style cutters with two flutes, give radiused grooves for decorative panel finishes and board edges.For deep channels, take a series of passes.SpecificationsD1=1/2 inches... read on
