Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM.Matches our range of profile scribers.Suitable for use on natural timber and MDF.When joining secti... read on
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inve... read on
Shape similar to Ref. 18/80.Suitable panel mould for use with Ref. PSC/5 & PSC/50.SpecificationsD=28.5 mmC=38 mmA=75 degreesOL=76 mmShank Diameter=1/2 inchChamfer height= 27.5 mmSh... read on
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.SpecificationsD=41.5 mmC=8 mmC2=8 mmR=19 mmR2=11 mmOL=56 mmShank Diameter=1/2 inch... read on
Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails.SpecificationsD=50 mmC=6.5 mmC2=11.5 mmR=20 mmR2=12 mmOL=51.8 mmShank Diameter=1/2... read on
