Account
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
We offer FREE UK Mainland delivery for orders over £50! (EX VAT exclusions apply).
Found 125 product(s). Showing product(s) 1 to 125.
The BTALU concealed hanger is one solution to connecting timber members together without seeing the connector. It is designed to be fixed to the header timber and then fully... read on
The ETB concealed connector comes in two parts. The first is pocketed in the header timber and fixed with nails, while the second part is fitted to the end of the beam with screw... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
The TU galvanised steel, load rated hanger provides an aesthetically attractive connection for exposed beams. Mild steel dowels and screws are included. TUBSL or TUBSR, factory... read on
The TCP truss clip attaches girders, trusses and rafters to wall plates to provide wind restraint. TCP Truss Clips may be used for general purposes, strongback attachment... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The PBH is suitable for heavy duty post support applications including Glulam timber posts,with a standoff height of 216mm. Dowels included. PBH75 suitable for posts 75 x 75mm to... read on
With these site adjustable hangers, you can always have the right hanger available for those special rush projects. This versatile range of products attaches joists/rafters to ti... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The ABW is an adjustable post base with a stand off for the post to help prevent moisture induced decay to the timber post. Designed for versatility and cost effectiveness. ... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
The APB features a post mounting plate on a screw allowing it to be adjusted to a specific standoff height ranging from 100-150mm. Suitable for post sizes 100 x 100mm to 200 x 20... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
Designed to attach timber members at irregular angles, these connectors can be bent on site from 0° to 135°. The staggered nail pattern reduces the possibility for s... read on
The H and L straps are designed to The Building Regulations for horizontal and vertical restraint. Heavy restraint straps meet requirements for lateral restraint of roof ... read on
FB20 galvanised fixing band is for all general light strapping needs. Perfect for DIY, industrial and agricultural applications. Comes in convenient 10 metre rolls. FB20, w... read on
The RHMSK is designed to support solid timber joists, I-joists or metal web joists from masonry walls. Material Pre-galvanised mild steel Benefits Due to non-welded man... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
The timber panel closer helps minimise air leakage at the joint between closed panels and also prevents damage to the exterior substrate when using a screw alone. Material ... read on
The JES is a two piece metal-work system which enables the use of engineered timber I-joists in loft conversions, offering a safe and economic alternative to the tradit... read on
The SDE is a two piece, width adjustable face fix hanger. The two separate components that make up the SDE system can be adjusted to suit a range of joist widths betwee... read on
E5/2C50 Reinforced angle brackets are suitable for structural applications in framing and wood-frame houses. Material Galvanized steel S250GD + Z275 according to NF EN 10346... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
Provide added strength and stability. Galvanised or stainless steel finish. Assists resistance to tensile stresses where settlement occurs. Easily incorporated into mortar&nb... read on
The CPT post base provides a clean look while providing a 25mm stand off height above the ground. reducing the potential for decay at the post end. The CPT can be fixed to a con... read on
SAE and SAI ranges are heavy-duty hangers designed for applications requiring additional strength. SAE hangers are nailed using square twist nails but have bolt holes for 1... read on
Superior alternative to unreliable, slow and costly timber struts. Meets bracing requirements for long span domestic floors. Material Pre-galvanised mild steel. Featu... read on
The PISBMAXI is a heavy duty elevated post base to suit various sizes of timber and Glulam posts. Material Material Grade S235 Finish Post hot dip galvanised. Benefits T... read on
The Simpson Strong-Tie RCKW is a heavy duty rigid connector that has been developed to resist an overturning moment at the base of exterior kneewalls and parapets as we... read on
The ITBS solves the problem of skew hangers in I-joist to I-joist connections. It can be handed left or right on site by the carpenter, removing confusion when the floor is built... read on
ETFSS hold down strap provides restraint against uplift to timber frame structures keeping them firmly to the ground. Quick and simple to install One size strap suits cavitie... read on
The SPR connector supports rafters from other timber members and can be sloped up or down by up to 45 degress. Slope angle can be adjusted on-site. Adjustable between 0 and 4... read on
Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies. FEATURES Material Steel S235JR ... read on
EFIXR angle brackets are intended for all assemblies for the design and installation of interior and exterior joinery. EFIXR stiffener improves rigidity particularly for large mo... read on
The HGUQ joist hanger is designed to support trusses and girder trusses from timber members. The HGUQ uses SDS screws instead of nails for even faster and easier installatio... read on
The THM (Truss Hanger Mono) is a joist hanger for supporting mono trusses from timber members. The THM hanger offers two installation options: Square twist nail... read on
The THA is a one-piece joist hanger supporting trussed rafters and composite timbers from timber members. The THA can be installed with a number of fixing options, for greater lo... read on
The AKR bracket is reinforced around the bend, which significantly increases the rigidity and strength of the bracket. One-piece connector. Reinforced corners provide enhance... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The JHM and JHMI range of joist hangers can be used to connect solid sawn joists, trusses and engineered joists to masonry walls or steel beams. Material Pre-galvanised mild ... read on
Screw in wall starter with nylon wall plug, WST provides lateral stability to brickwork or blockwork walls. Can be installed horizontally or at a 30° angle to the mortar join... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
An accepted method of tying masonry to a framed structure is the use of steel channels and ties. This allows the channel to be fixed to the framed structure during or shortly aft... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The ABR angle brackets with rib can be used in high loaded timber structures. These brackets are made of stainless steel and are recommended in aggressive atmospheres ... read on
The A35E anchor’s exclusive bending slot allows instant, accurate bending on site for all two and three-way connections. • Balanced, completely reversible design ... read on
Light reinforced angle brackets are used to assemble small structural joinery for internal and external applications. Material Pre-galvanised mild steel. Benefits Multi... read on
The SFLH is an innovative single piece hanger designed to support timber joists from masonry walls, without the need for masonry above the course of blockwork supporting the... read on
Reinforced angle brackets are suitable for structural applications in framing and timber framed houses as well as light gauge steel construction. Material Galvanized steel S2... read on
Nail plates are used to connect two or more timber members together. They are available in a variety of sizes. Material Pre-glavanised mild steel. Grade S250GD Benefits ... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
Designed to provide ties for trusses and rafters likely to be subject to high winds, this versatile range may be used for general purposes, strongback attachements and as all-pur... read on
A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining the ... read on
A 75mm wide, fine stainless steel mesh on a 30m roll. Easy to cut and install. Allows roof space ventilation and helps prevent birds and insects from gaining access via soffits. ... read on
Simpson Strong-Tie SAE heavy duty face fix hanger, designed for applications requiring additional strength. Hangers have bolt holes for 12mm fasteners into the face and whilst pr... read on
The HGUS joist hanger is designed to support trusses and girder trusses from timber members. Material Pre-galvanised mild steel For sizing and technic... read on
The MH is a one piece galvanised hanger available in a range of widths for light duty applications such as trimmers and ceiling joists of rectangular section. THe MH can also be ... read on
The UK’s most popular solution to the tying-in of new walls to existing masonry walls/columns. The only system with “snap out” ties which can be positioned anyw... read on
The PWT200 is the first connector specifically designed and engineered to connect the party walls of timber framed buildings. It’s manufactured using minimum material secti... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The IUSE is a face fix hanger for supporting I-joists from timber members.This hanger incorporates the “Strong Grip™” which secures the I-joist withoutthe need ... read on
The SPF can be used to connect two timbers that cross over at 90 degrees to each other and can be used with a number of timber dimensions. The SPF are handed, left and right, and... read on
Glide shoes are specially designed to allow horizontal movement between raised tie trusses and wallplates.The GS allows lateral movement of raised tie trusses up to 15mm during i... read on
The ITB hanger eliminates the requirement for backer blocks when supported from anI-Joist header. The bottom flange location tabs, and an open top flange, provide enhanced c... read on
Light angle brackets are used in a large number of DIY applications and are commonly used for reinforcing furniture assemblies. FEATURES Material Steel S235JR ... read on
The SWT wall ties are used to restrain external brickwork back to timber frame building structures. The BSWT offers an outstanding combination of performance and cost in a wall t... read on
The PPA is for post base installations requiring a higher standoff distance. Material Steel S235JR according to NF EN 10025 Hotdip galvanized according to NF EN ISO 1461 ... read on
Suitable for use with cavity wall ties, the insulation retaining clip is a 75mm diameter plastic disk used to hold insulation material back to the structure,... read on
The HRC is a one-piece connector for supporting hip members from the ridge beam or rafters. It is site adjustable for slopes up to 45°, to cater for the hip pitch for bo... read on
The PBS post base is designed to be installed into wet concrete and features a stand off to help prevent moisture induced decay to the timber post. Sold in Packs of 10 only. Mat... read on
The HJHM range of joist hangers can be used to connect solid sawn joists, trusses, and engineered joists to masonry walls or steel beams. Top flange provides widest area ... read on
THGQ is a heavy duty girder truss hanger designed to support multiple ply girder trusses from a vertical member of a girder truss. Use with SSH screws instead of bolts - ... read on
PLEASE NOTE THIS IS A MADE TO ORDER ITEM SO IS NON RETURNABLE The IUC is a face mounted concealed flange hanger for solid timber sections or engineered joists. These hangers ca... read on
The WSTC is a screw-in cavity wall tie suitable for connecting a new leaf of masonry to an existing structure. Supplied with nylon wall plug and neoprene ‘O’ ring ... read on
The PPRC allows the structure to be adjusted after it has been built. Adjust the off the ground height from 100 to 150mm even after the post has been installed. Material dich... read on
TFLS provides the combined function of levelling and fixing the sole plate to the foundation or substructure. It comprises a universal base plate and packing pieces which ca... read on
A direct replacement for traditional restraint straps, the innovative design of these lightweight straps allows ease of handling and installation whilst maintaining ... read on
JHA is a height adjustable joist hanger for supporting timber joists from timber members. Available in standard leg (JHA270) and long leg (JHA450) versions. Material Pre-gal... read on
The VTCR is designed to connect valley trusses to common trusses. Structural valley connection. Single sided for new construction or retro fit. Site adjustment for pitch. Ad... read on
The FMS strap provides restraint to masonry walls when the walls are supporting joist ends. They make installation easier, quicker and more cost effective - without compromising ... read on
The PBP60/50 post base is most commonly use for pergola or porch type construction, but can be used in other situations. It should be used by pair for square timber sections fro... read on
The SPA is a versatile bracket used to attach timber sole plates to concrete foundations. Material Pre-galvanised mild steel For sizing and technical information please se... read on
Single sided and double sided connector plates for enhanced bolt performance in timber. Conforms to BS EN 912: 1999 Annex C. Specification for toothed plate connectors. Material... read on
It's common practice to cut a hole in the tops of the floor joists so that pipes and electrical cables can pass through the void between an upper floor and ceiling below it - par... read on
The FMS strap provides restraint to masonry walls when the walls are supporting joist ends. They make installation easier, quicker and more cost effective - withou... read on
The BTS and SWT wall ties are used to restrain external brickwork back to timber frame building structures. The BTS and SWT offer an outstanding combination of performance a... read on
The MP is an easy to use connector for timber splices, no nails required. For non-structural applications only; not for truss applications. Material Pre-galvanised mild steel... read on
Types 2, 3 and 4 Stainless Steel Masonry to Masonry Wall Ties.WTS2: Type 2 Wall Ties: Masonry General Purpose Type 2 wall ties are suitable for general purpose applications such ... read on
Reinforced angle bracket ABR255 has been especially developed to fix CLT panels on wood or concrete support. Very versatile, it is particularly resistant to shear loads... read on
The RBL Bib Lath provides plaster/render backing and is also suitable for the refurbishing of damaged or deteriorated faces of masonry walls. Available in galvanised for internal... read on
The SFLHI is an innovative single piece hanger designed to support timber joists from masonry walls without the need for masonry above the course of block work supporting the han... read on
When fixing windows, door frames etc. to masonry, the frame tie provides enhanced mortar keying and reduces the risk of injury from sharp edges. Note: Frame tie should be fully ... read on
The SAE and SAI ranges are heavy-duty hangers designed for timber to timber applications requiring additional strength. • The hanger depth is to be at least 60% of the car... read on
The SFH Safety Fast Hanger is designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. M... read on
The RR ridge rafter connector provides alignment control and correct nailing locations. The RR may be used with any rafter slope up to 30°. For back-to-back installations, th... read on
FB20 fixing band is for all general light strapping needs. Perfect for DIY, industrial and agricultural applications. Comes in convenient 10 metre rolls. FB20, which comes suppl... read on
The ‘A’ angles versatility means it can be used in many applications requiring 90° fixing. Material Pre-galvanised mild steel. For sizing and technical inf... read on
N3.75 square twist nails are tested and approved for use when installing Simpson Strong-Tie connectors including joist hangers, brackets and straps. CE marked to EN14592. Stee... read on
Ideal for use as a general reinforcement mesh. DML Expanded Metal Lathing is widely used as a backing to help prevent cracks occurring where different materials meet. Availa... read on
Simple angle bracket which is very versatile, used for timber to timber connections. Material Pre-galvanised mild steel. Benefits Available in various width.... read on
The PC extension side plates function as tie straps where splices occur. EPC option should be used where the beam ends at the post. Standard connectors for post to beam connectio... read on
A reinforcing angle designed to transfer loads between 2 ply floor joists/metal web joists. The L70 Reinforcing Angle may be used in pairs to transfer the loads between floo... read on
The HMBTS type 7 timber frame wall tie is designed to connect the masonry outer leaf to a structural timber frame. Available is a range of sizes to suit cavities from 50mm to ... read on
LUP is a light duty joist hanger for supporting timber joists from timber members. Precision formed and engineered for fast installation and maximum loads. Speed prongs are c... read on
The NS prevents nails/screws from piercing water pipes and electrical cables. Material Pre-galvanised mild steel Suitable On Porteur/Porté : bois massif, ... read on
Attaches window boards to masonry wall. Material: Pre-galvanised mild steel. Item code WBT06 (150mm length). For sizing and technical information please see the document downlo... read on
The IC Insulation clip provides a quick and simple method of retaining rigidinsulation within a timber frame panel, creating a controlled gap for services.The IC saves time by al... read on
The IC Insulation clip provides a quick and simple method of retaining rigidinsulation within a timber frame panel, creating a controlled gap for services.The IC saves time by al... read on
90 Degree Angle Bracket 2mm Pre-Galv Simpson Strong- Tie light reinforced angle bracket used for assembling of structrural joinery for internal applications. Pre-galvanised.W1 -... read on
The ITSE hanger incorporates the ‘‘Strong Grip’’ which secures theI-joist without the need for any fasteners - where no uplift is required. Value-engin... read on
Universal, flexible and simple to install, the EWH is an engineered hanger that has been designed to fulfil a wide variety of installation options. Material 275 g/m2 Pre... read on
Scrolled hip irons provide decorative restraint and securely anchor ridge tiles on hipped roofs, preventing water ingress and protecting the roof from potential damage caused by ... read on
The SPWT has been specifically designed and engineered to connect separating walls of attached timber framed buildings. The SPWT is to be used for applications where the timber f... read on
The SAE and SAI ranges are heavy-duty hangers designed for timber to timber applications requiring additional strength. • The hanger depth is to be at least 60% of the c... read on
This connector was developed to be used with timber curtain wall on concrete floor. It can be used in several configuration depending on the installation. Its special sh... read on
The 1ARBGAL is 300mm long arrisrail bracket for connecting arrisrails to wooden posts. Suitable for use on 75mm Arrisrails. Material Pre-galvanised mild steel. Features The 1... read on
The SFWH Safety Fast Hangers are designed to support timber joists, beams and trussed rafters from masonry walls without the need for masonry above the top flange. Benefits Req... read on
The Hi is used to hold ridge tiles in place.Material: Galvanised Mild steel.Finish: Hot-dip galvanised. For sizing and technical information please see the document down... read on
The SML (Security Mesh Light) and SMH (Security Mesh Heavy) are a low profile flattened mesh ideal for sandwiching between plasterboard and structural studs or joints to impr... read on
The SFLH is an innovative single piece hanger designed to supporttimber joists from masonry walls, without the need for masonry abovethe course of blockwork supporting the h... read on
x 159mm Height Face Fix Hanger Pre-galvanised Simpson Strong-Tie SAE heavy duty face fix hanger, designed for applications requiring additional strength. Hangers have bolt holes... read on
