Ideal for following templates when panelling and profiling in furniture manufacture.It is advisable that the template is at least 5mm thicker than the cut length of the cutter.Spec... read on
To create profiles in the face or edge of drawer fronts and cabinet doors.SpecificationsD=19 mmD2=6.5 mmC=11 mmR=4 mmOL=53 mmShank Diameter=1/4 inchGeneral InformationNett Weight (... read on
inch Produces an elegant edge mould, or a shallow panel effect when routing on its full width. inch SpecificationsD=20 mmC=15 mmR=6 mmOL=53 mmShank Diameter=1/2 inchGeneral InformationNett ... read on
inch With bearing guided ogees, change profile by using a larger bearing and vary the depth. inch SpecificationsD=1 inchD=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmB2=12.7 mmR=4 mmOL=63 mmShank Dia... read on
inch With bearing guided ogees, change profile by using a larger bearing and vary the depth. inch SpecificationsD=1 inchD=25.4 mmC=5/8 inchC=15.9 mmB=9.5 mmB2=12.7 mmR=4 mmOL=54 mmShank Dia... read on
Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth.Supplied with two bearings.The larger bearing removes the bottom quirk.... read on
Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth.Supplied with two bearings.The larger bearing removes the bottom quirk.... read on
Self-guiding cutter with facility to change profile by fitting larger bearing & varying the depth.Supplied with two bearings.The larger bearing removes the bottom quirk.Specificati... read on
Supplied with two bearings.The larger bearing removes the bottom quirk.Specifications inch D=63 mmC=20 mmB=9.5 mmB2=12.7 mmR=9.5 mmR2=9.5 mmOL=79 mmShank Diameter=1/2 inchFor stationary... read on
