Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=44.0 mmC=19.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=48 mmC=22 mmB=9.5 mmB2=12.7 mm... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
A quarter ellipse cutter for architraves and hand rails.Can be used to form the top portion of handrail moulding when used in conjunction with Ref. 93/3.SpecificationsD=69.2 mmC=16... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a top... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.Ref. 7/01 has an extra long shank of 40mm.SpecificationsD=3/8 inchD=9.5 mmD2=4.5 mmC=9 mmR=2.5 mmOL=49 mmSha... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=19 mmC=11 mmR=4 mmOL=38 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg): 21Gros... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=18 mmD2=12 mmC=10 mmR=3 mmOL=38.6 mmShank Diameter=1/4 inchGeneral InformationNett Weight (k... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=50.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (k... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=55 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg)... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=28 mmC=15 mmR=8 mmOL=68 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 88Gros... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=31 mmC=16 mmR=10 mmOL=54.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 77G... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=31 mmD2=11 mmC=16 mmR=10 mmOL=44.6 mmShank Diameter=1/4 inchGeneral InformationNett Weight (... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=38 mmC=18 mmR=12.7 mmOL=56.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 6... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=35 mmC=17 mmR=12 mmOL=55.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 81G... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=41 mmC=20 mmR=15 mmOL=58.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 112... read on
Some Ovolo cutters can be used with radius cutters, to make rule joints.SpecificationsD=60 mmC=27 mmR=20 mmOL=65.1 mmBottom flat=11.1 mmShank Diameter=1/2 inchFor stationary machin... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=15 mmC=3/8 inchC=9.5 mmP=9 mmR=1/8 inchR=3.2 mmOL=41.5 mmShank Diameter... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=19 mmC=11.8 mmR=3/16 inchR=4.8 mmP=9 mmOL=48.9 mmShank Diameter=1/4 inc... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=22 mmC=12.6 mmR=1/4 inchR=6.3 mmP=9 mmOL=49.7 mmShank Diameter=1/4 inch... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=26 mmC=14.3 mmR=5/16 inchR=8 mmP=9 mmOL=51.4 mmShank Diameter=1/4 inchG... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=29.0 mmC=15.8 mmP=9 mmR=3/8 inchR=9.5 mmOL=52.9 mmShank Diameter=1/4 in... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=34.4 mmC=19 mmP=9 mmR=1/2 inchR=12.7 mmOL=56.1 mmShank Diameter=1/4 inc... read on
A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes.SpecificationsD=36 mmD2=16 mmC=33 mmR=20 mmOL=71.1 mmShank Diameter=1/2... read on
