inch Cut a wider edge line, at an angle of 80 degrees.A 16mm bearing is supplied as standard.A larger 19mm bearing will spread the wear of the cutting edges. inch SpecificationsD=20 mmC=14 ... read on
A self-guided combination trimmer.A 90 degree trim is obtained by engaging the bottom half.A 45 degree trim is obtained by lowering the cutter.A fine height adjuster is recommended... read on
inch Cut a wider edge line, at an angle of 45 degrees.A 16mm bearing is supplied as standard.A larger 19mm bearing will spread the wear of the cutting edges. inch SpecificationsD=27 mmC=9 m... read on
Gives a smooth bevel finish for laminates and other materials. Bearing follows the board beneath.SpecificationsD1=5/8 inchesD1=15.9 mmC=1/4 inchesC=6.3 mmOL=53 mmB=1/2 inchesB=12.... read on
