Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=28.7 mmC=13.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=35.0 mmC=16.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=44.0 mmC=19.0 mmB=9.5 mmB2=12.... read on
Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding.The smaller bearing gives a 3.2mm quirk.SpecificationsD=48 mmC=22 mmB=9.5 mmB2=12.7 mm... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
A quarter ellipse cutter for architraves and hand rails.Can be used to form the top portion of handrail moulding when used in conjunction with Ref. 93/3.Specifications inch D=69.2 mmC=1... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Self-guiding cutters for rounding over edges do not require a side fence.They are supplied with two bearings.Use the larger bearing for a round-over.If the cutter is lowered, a to... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints.Ref. 7/01 has an extra long shank of 40mm. inch SpecificationsD=3/8 inchD=9.5 mmD2=4.5 mmC=9 mmR=2.5 mmOL=49 mmS... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=19 mmC=11 mmR=4 mmOL=38 mmShank Diameter=1/4 inchGeneral InformationNett Weight (kg): 21... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=18 mmD2=12 mmC=10 mmR=3 mmOL=38.6 mmShank Diameter=1/4 inchGeneral InformationNett Weigh... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=50.1 mmShank Diameter=1/2 inchGeneral InformationNett Weigh... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=22 mmD2=12 mmC=12 mmR=5 mmOL=55 mmShank Diameter=1/4 inchGeneral InformationNett Weight ... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=28 mmC=15 mmR=8 mmOL=68 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg): 88... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=31 mmC=16 mmR=10 mmOL=54.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg):... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=31 mmD2=11 mmC=16 mmR=10 mmOL=44.6 mmShank Diameter=1/4 inchGeneral InformationNett Weig... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=38 mmC=18 mmR=12.7 mmOL=56.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=35 mmC=17 mmR=12 mmOL=55.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg):... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch SpecificationsD=41 mmC=20 mmR=15 mmOL=58.1 mmShank Diameter=1/2 inchGeneral InformationNett Weight (kg):... read on
inch Some Ovolo cutters can be used with radius cutters, to make rule joints. inch Specifications inch D=60 mmC=27 mmR=20 mmOL=65.1 mmShank Diameter=1/2 inchFor stationary machines at max. rec... read on
inch Two rounded corners can be cut simultaneously.By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded.Central guide bearing can be rem... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=15 mmC=3/8 inchC=9.5 mmP=9 mmR=1/8 inchR=3.2 mmOL=41.5 mmShank Diameter... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=19 mmC=11.8 mmR=3/16 inchR=4.8 mmP=9 mmOL=48.9 mmShank Diameter=1/4 inc... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=22 mmC=12.6 mmR=1/4 inchR=6.3 mmP=9 mmOL=49.7 mmShank Diameter=1/4 inch... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=26 mmC=14.3 mmR=5/16 inchR=8 mmP=9 mmOL=51.4 mmShank Diameter=1/4 inchG... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=29.0 mmC=15.8 mmP=9 mmR=3/8 inchR=9.5 mmOL=52.9 mmShank Diameter=1/4 in... read on
Small solid guide pin can follow more intricate shapes in contrast to bearing guided cutters.SpecificationsD=34.4 mmC=19 mmP=9 mmR=1/2 inchR=12.7 mmOL=56.1 mmShank Diameter=1/4 inc... read on
inch A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. inch SpecificationsD=36 mmD2=16 mmC=33 mmR=20 mmOL=71.1 mmShank Diameter=1... read on