Trend Trimmer Router Cutters

Found 25 product(s). Showing product(s) 1 to 25.

• Trend Craftpro 1/4in Combi Trimmer 60 Degree Angle Bit 12.7mm X 12.7 - Code C047AX1/4TC

  

  For trimming top & lip.1/4" shank 60? combination trimmer for 90? edge trimming and 60? bevel cuts.Ideal for trimming laminates and veneers flush with a square edge or chamfer... read on

  1. @103969Available
  2. Trend
  3. £21.32 (ex VAT)
  4. £25.58 (inc VAT)

  ViewAdd to cart

• Trend Chamfer Angle=60 Degrees - Code C047X1/4TC

  

  Two flute cutters for producing extra clean cut bevelled edges.No plunge cut.SpecificationsD=1 inchD=25.4 mmC=25/64 inchC=10 mmA=60 degreesOL=50 mmShank Diameter=1/4 inchGeneral In... read on

  1. @103970Available
  2. Trend
  3. £21.88 (ex VAT)
  4. £26.26 (inc VAT)

  ViewAdd to cart

• Trend Chamfer Angle= 45 Degrees - Code C048X1/4TC

  

  Two flute cutters for producing extra clean cut bevelled edges.No plunge cut.SpecificationsD=1 3/8 inchD=34.9 mmC=25/64 inchC=10 mmA=45 degreesOL=50 mmShank Diameter=1/4 inchGenera... read on

  1. @103971Available
  2. Trend
  3. £30.38 (ex VAT)
  4. £36.46 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 9.5mm Diameter - Code C115AX1/4TC

  

  Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 9.5mm diameter Two Flute Carbide tips.Two flute carbide TCT tips for clean, professional finish on timber lippin... read on

  1. @104067Available
  2. Trend
  3. £19.31 (ex VAT)
  4. £23.17 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 9.5mm Diameter - Code C115X1/4TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=3/8 inchD=9.5 mmC=1/2 inchC=12.7 mmB=9.5 mmA=90 degreesOL=63 mmShank Diameter=... read on

  1. @104068Available
  2. Trend
  3. £18.94 (ex VAT)
  4. £22.73 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 9.5mm Diameter - Code C115X8MMTC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=3/8 inchD=9.5 mmC=1/2 inchC=12.7 mmB=9.5 mmA=90 degreesOL=64.5 mmShank Diamete... read on

  1. @104069Available
  2. Trend
  3. £18.94 (ex VAT)
  4. £22.73 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 12.7mm Diameter - Code C116AX1/4TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=1/2 inchD=12.7 mmC=5/8 inchC=16 mmB=12.7 mmA=90 degreesOL=68 mmShank Diameter=... read on

  1. @104070Available
  2. Trend
  3. £18.17 (ex VAT)
  4. £21.80 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 12.7mm Diameter - Code C116X1/2TC

  

  Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips.Two flute carbide TCT tips for clean, professional finish on timber lippi... read on

  1. @104071Available
  2. Trend
  3. £19.74 (ex VAT)
  4. £23.69 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Trimmer 12.7mm Diameter - Code C116X1/4TC

  

  Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips.Two flute carbide TCT tips for clean, professional finish on timber lippi... read on

  1. @104072Available
  2. Trend
  3. £19.74 (ex VAT)
  4. £23.69 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 19.1mm Diameter - Code C117AX1/2TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD1=3/4 inchesD1=19.1 mmC=1 inchesC=25 mmB=15.9 mmA=90 degreesOL=76.5 mmShank Dia... read on

  1. @104073Available
  2. Trend
  3. £26.35 (ex VAT)
  4. £31.62 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 19.1mm Diameter - Code C117AX1/4TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD1=3/4 inchesD1=19.1 mmC=1 inchesC=25 mmB=15.9 mmA=90 degreesOL=78.5 mmShank Dia... read on

  1. @104074Available
  2. Trend
  3. £26.35 (ex VAT)
  4. £31.62 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 19.1mm Diameter - Code C117BX1/2TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD1=3/4 inchD1=19.1 mmC=50 mmOL=4 1/64 inchOL=102 mmB=15.9 mmA=90 degreesShank Di... read on

  1. @104075Available
  2. Trend
  3. £44.33 (ex VAT)
  4. £53.20 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 18.2mm Diameter - Code C117CX1/4TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=18.2 mmC=14 mmOl=54 mmB=18.2 mmShank Diameter=1/4 inchGeneral InformationNett ... read on

  1. @104076Available
  2. Trend
  3. £21.09 (ex VAT)
  4. £25.31 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 15.9mm Diameter - Code C117X1/4TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=5/8 inchD=15.9 mmC=5/8 inchC=15.9 mmOL=2 41/64 inchOL=67.5 mmB=15.9 mmA=90 deg... read on

  1. @104077Available
  2. Trend
  3. £21.32 (ex VAT)
  4. £25.58 (inc VAT)

  ViewAdd to cart

• Trend Self Guided Bevel Trim Angle=65 Degrees - Code C119X1/4TC

  

  This is bearing guided and gives a smooth bevel finish for laminates and other materials.Bearing follows the board beneath.SpecificationsD=18.5 mmC=1/4 inchC=6.3 mmB=12.7 mmA=65 de... read on

  1. @104080Available
  2. Trend
  3. £17.15 (ex VAT)
  4. £20.58 (inc VAT)

  ViewAdd to cart

• Trend Overlap Trim12.7mm Diameter - Code C133X1/4TC

  

  This 'roughing' trimmer, leaves an overhang of 3mm, for secondary final trim.SpecificationsD=1/2 inchD=12.7 mmC=1 inchC=25.4 mmB=19.1 mmE=3.2 mmA=90 degreesOL=81.5 mmShank Diameter... read on

  1. @104105Available
  2. Trend
  3. £29.82 (ex VAT)
  4. £35.78 (inc VAT)

  ViewAdd to cart

• Trend Three Flute Trim12.7mm Diameter - Code C134X1/4TC

  

  Three flute self-guiding for extra fine trimming of laminate or plywood overlay.SpecificationsD=1/2 inchD=12.7 mmC=1/2 inchC=12.7 mmB=12.7 mmA=90 degreesOL=67 mmShank Diameter=1/4 ... read on

  1. @104107Available
  2. Trend
  3. £18.94 (ex VAT)
  4. £22.73 (inc VAT)

  ViewAdd to cart

• Trend Pierce Trim 12.7mm Diameter X 30mm Cut - Code C135AX1/2TC

  

  Cuts out apertures in laminate worktops.The nose of the cutter acts as a guide follower.SpecificationsD=12.7 mmD=1/2 inchC=30 mmOL=85 mmShank Diameter=1/2 inchGeneral InformationNe... read on

  1. @104108Available
  2. Trend
  3. £32.28 (ex VAT)
  4. £38.74 (inc VAT)

  ViewAdd to cart

• Trend Pierce Trim 6.3mm Diameter X 18mm Cut - Code C135X8MMTC

  

  Cuts out apertures in laminate worktops.The nose of the cutter acts as a guide follower.SpecificationsD=1/4 inchD=6.3 mmC=45/64 inchC=18 mmOL=77 mmShank Diameter=8 mmGeneral Inform... read on

  1. @104110Available
  2. Trend
  3. £18.94 (ex VAT)
  4. £22.73 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 6.35mm Diameter X 12.7mm - Code C167X1/4TC

  

  Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide tips.Two flute carbide TCT tips for clean, professional finish on timber, plast... read on

  1. @104174Available
  2. Trend
  3. £16.61 (ex VAT)
  4. £19.93 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 6.35mm Diameter X 25.4mm - Code C168X1/4TC

  

  Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 6.3mm diameter Two Flute Carbide tips.Two flute carbide TCT tips for clean, professional finish on timber, plast... read on

  1. @104175Available
  2. Trend
  3. £17.15 (ex VAT)
  4. £20.58 (inc VAT)

  ViewAdd to cart

• Trend Guided Trimmer 6.35mm Diameter X 25.4mm - Code C168X8MMTC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=1/4 inchD=6.35 mmC=1 inchC=25.4 mmB=6.35 mmA=90 degreesOL=76.5 mmShank Diamete... read on

  1. @104176Available
  2. Trend
  3. £17.15 (ex VAT)
  4. £20.58 (inc VAT)

  ViewAdd to cart

• Trend Bearing Guided Trimmer 12.7mm Diameter - Code C195X1/2TC

  

  Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips.50mm cutting depth for replicating thicker components with templates; idea... read on

  1. @104218Available
  2. Trend
  3. £26.89 (ex VAT)
  4. £32.27 (inc VAT)

  ViewAdd to cart

• Trend Bearing Guided Trimmer 12.7mm Diameter - Code C196X1/2TC

  

  Used for trimming plastic or plywood overlays.Also for copy profiling with a template.SpecificationsD=1/2 inchD=12.7 mmC=38 mmB=12.7 mmA=90 degreesOL=92 mmShank Diameter=1/2 inchGe... read on

  1. @104219Available
  2. Trend
  3. £25.11 (ex VAT)
  4. £30.13 (inc VAT)

  ViewAdd to cart

• Trend Bearing Guided Three Flute Trimmer 12.7mm Diameter 25mm Length - Code C205X1/4TC

  

  Trend Craft Pro 1/4in shank bearing guided trimmer cutter - 12.7mm diameter Triple Flute Carbide tips.Triple flute carbide TCT tips ensure the cleanest of finishes on timber, plas... read on

  1. @104229Available
  2. Trend
  3. £21.32 (ex VAT)
  4. £25.58 (inc VAT)

  ViewAdd to cart